Rugged design with multiple safety features and choice of two temperature control options.
Reaches 1200°C maximum temperature.
Heavy-duty firebrick insulation surrounds the opening for added durability.
Adjustable alarm or Over-temperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat.
Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition.
Counter-weighted door swings upward, directing heat away from operator.
Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber.
Door safety switch protects operator by removing power to the heating elements upon opening the door.
Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices.
LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only).
Single-setpoint Controller (B1)
Single ramp to setpoint and a dwell.
Single display shows actual temperature or setpoint.
8-step Programmable Controller (C1)
Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes.
“Holdback” feature “holds” program until furnace temperature heats up or cools down to pre-programmed parameters — program will never outrun furnace performance.
_page13_image11.jpg)
_page13_image17.jpg)
_page13_image5.jpg)
_page13_image6.png)
